Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the responsiveness of gas cooktops, but needs an oven to bake in? Discover a dual-fuel range cooker that gives you the best of both worlds.
Many experienced home chefs prefer gas cooktops due to their superior temperature control and ability to use advanced cooking techniques like charring. These cooktops can be costly though, especially when you need an additional gas hook-up and electrician for installation.
What is a 13amp plug?
If you own dual fuel range cooker (also known as an electric and gas oven), then you'll need an appropriately rated 13 amp plug. The plug also needs to be wired in the cooker circuit ring by a competent electrician.
This ensures that the current flowing through the plug will not exceed the limit of safety, which could lead to an electrical fire. The current is controlled by a fuse in the plug. The fuse goes out whenever the current passes through it beyond its capacity. This safeguards the appliance from an overcharge of electricity.
The fuse is listed at 13 amps as indicated on the top of the plug. this is the maximum amount of current that the plug can pass without causing damage to the appliance or overheating the socket. It is important to ensure that when replacing fuses, you always use the same amperage as the original. If you replace the fuse using one with a different rating, then you run the risk of overheating the socket, and potentially putting yourself and others in danger.
Ceramic 13 amp fuses are very durable, and are able to withstand extreme temperatures that can be generated by an oven. Ceramic elements are also fire-resistant, and is therefore a better option over other kinds.
There are a few different ways in which 13 amp plugs can be connected. The plug can be connected to a live socket with either a screw or a jaw cord clamp. The clamp must be tightened after the plug is tightly pushed into place.
Before connecting the wires you may need to remove the wiring diagram on cardboard that is placed on top of the pins on some plugs. The wires must be trimmed to the right length, because if they are too long they could be crushed when the plug covers are replaced. The earth wire should be the longest to ensure it is connected before the neutral and line pins.
How do I connect the 13amp plug?
The vast majority dual cookers that use fuel in the UK are wired with an amp rating of 13 amps. This is important since ovens draw substantial current, while standard plug sockets only have a 10-amp rating.
In general, new appliances should be fitted with a plug at the point of sale. This is in order to be in compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. However, older appliances may not have the plug, and this is the reason why the problem occurs.
The first thing to consider when connecting a cooktop to an existing plug socket is to make sure that the fuse rating of the fuse box is in line with the rating of the plug. This is vital because a fuse that is not properly sized could be dangerous.
It is also recommended to check that the fuse is fully seated in the cartridge, and there isn't any movement. The next step is to prepare the flex that is to be used. Remove the sheathing from the flex, exposing the three conductors insulated within. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) using a utility knife, without piercing the individual conductors. The nick should be large enough that the sheathing can split and expand the nick as it is pulled back to reveal the cable beneath. Finally, cut off the excess sheathing, leaving approximately 40mm of length that extends beyond the flexing end.
The flex is placed over the plug, with the earth terminal on top and the live and neutral terminals at the bottom. Utilizing the colored conductors to guide you to the right direction, the sheathing should be removed from each pin and the internal cable is inserted to the correct terminal using the cord grip. If the plug has an attached cord clamp that is screw-type, let it loosen and then pull the insulation back to expose the copper wires. Finally, connect each of the conductors insulated to the correct terminal (starting with the earth first, then neutral and finally the live) using the channel they are running through the plug.
What is the maximum current draw of a 13amp plug?
The maximum current draw for 13amp plugs at 230volts is 3kw. This is a significant amount of power, but the standard fuse that is fitted in the UK plugtop will not fail until the cable has heated to a risky temperature. ovensandhobs.uk or socket could cause fire, so it's vital to be vigilant about how much power you use particularly in the kitchen.
The fuse inside the plugtops are made of ceramic, around 25mm long and 240V mains rated. The fuses are marked with an BS Kitemark or a similar mark on the side, and they will contain sand. Alternatives to glass or plastic are available, but they should not be used in combination with a live plug.
The majority of dual fuel range cookers sold in the UK require a hard-wired connection and are not able to plug directly into an outlet on the wall. They are typically connected to a dedicated cooker ring circuit that is suitable for appliances that draw up to 20 amps.
Examine the ring circuit in your home by using the fuse box, or contact an electrician nearby. They should be able to tell you whether the sockets in your home are connected to the same ring or separate and if there is a dedicated circuit for your oven.
If you're in the market for a new dual fuel range cooker, the size of your kitchen is a vital aspect to take into consideration. We have a great choice of cookers to fit any space, from compact 50 - 60cm dual fuel models and vast 90cm + double oven options from leading brands like Rangemaster and StovesAreUs.
If you're after something different Don't worry, we also offer a fantastic collection of electric and gas multi-functional cookers. These versatile machines let you cook a variety of meals like pasta, casseroles, and curries.
Explore our entire range of Cookers in Currys on our website or visit us in store to take a look. We provide free delivery and installation at home on selected range cookers, and we also offer flexible payment options. Our staff is ready to answer any questions you may have. You can contact us via email or phone. Credit is subject to status and terms and conditions apply.
What is the maximum draw of an appliance switch?
There is a lot of confusion about what the maximum current draw of a cooker's switch is. The majority of cookers are hard-wired and connected to an oven-ring circuit not an ordinary socket. This is because they will often draw more than 20 amps of power when both the gas hob and electric oven are being used.
Therefore, you cannot find a dual range cooker with a fuel source that can be connected to a standard socket because this could create a serious fire risk and would be against electrical regulations. A licensed electrician must always install new electrical circuits in the kitchen, connecting them to a cooker. They should also ensure that the load of the oven and hob do not exceed the circuit's supply capacity.
Dual fuel range cookers blend the ability to cook with the sensitivity of a gas stove with the precision and accuracy of an electric oven. This is the reason they are popular among chefs and home cooks alike. Dual cookers that use fuel are great for trying out different cooking techniques, such as searing or charring.
When you are looking to purchase an appliance for your kitchen, you will need to consider several factors like size, function and cost. In addition, you will be required to ensure that your house has the right gas hook-up for the appliance. If you're not sure then make an appointment with an appointment with a Gas Safe engineer to inspect your home prior to installation.
The Currys range of dual fuel range cookers includes options to suit a variety of budgets, from affordable models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something bit more sophisticated, we also stock an extensive selection of premium JennAir ranges, which come with several innovative features.
When you purchase a new dual fuel range cooker, it is essential to read the owner's manual for specific information regarding the electrical and gas requirements. You will require a gas connection in your home. A plumber might be required to set it up for you. Depending on your home you'll also need to ensure that you have a dedicated cooker ring circuit that is installed and signed off by a qualified electrician.